Description
Key Features of Key YD – 250RX
- Inverter-based digital wave control GMAW and FCAW welding
- Higher efficiency and higher power factor results in greater
power saving. - Designed to work even under high ambient temperatures up
to 50° - Lightweight and compact MIG/MAG/FCAW welding outfit.
- Unique design of three layer and four room dust-free
- RX1 Series is manufactured as per Std. IEC 60974-1:2000/GB
1:2004. - Fresh tip treatment and burn-back time control are
- Works on 50/60 Hz frequency in power supply.
- Equipped with Synergic Mode (Unitary Function) in which
welding voltage is set based on the welding current value
The voltage can be adjusted finely to fit the best current values. - Digitally controlled waveform enables superior arc
| Technical Specifications | Unit | YD - 250RX1 |
| INPUT | ||
| Input Supply | ||
| Voltage | Volts . | 415 , + 15 % , -20 % |
| Phase / Freq . | No./Hz | 3ph / 50-60 |
| Max . Input KVA @ 415Vac | ||
| @ 60 % Duty Cycle | KVA / KW | 8 / 7.7 |
| @ 100 % Duty Cycle | KVA / KW | |
| OUTPUT | ||
| Rated Current Range | Amps | 50-250 |
| Rated Output Range | Volts | 12-26.5 |
| Welding Current ( 40 ° C ) | ||
| @ 60 % Duty Cycle | Amps | 250 |
| @ 100 % Duty Cycle | Amps | 193 |
| GENERAL | ||
| Power Control Method | IGBT Inverter Controlled | |
| Digital Display | 4 Digit - 7 segment LED Display | |
| Wave from Control | Digitally Controlled Waveform | |
| Welding Sequence | a . Main welding b . Main welding - crater ( Crater repeat is available ) | |
| Ingress Protection | Class | IP 21S |
| Insulation | Type | H |
| Cooling | Forced air cooling | |
| Power Factor | Degree C | > 0.9 |
| Operating Temperature | -10 to 50 | |
| Dimensions ( LxBxH ) | mm | 545x380x570 |
| Weight | Kg | 44 |
| WIRE FEEDER | ||
| Rated Welding Current | Amps | 250 |
| Applicable wire diameter | mm | 0.8 , 1.0 |
| Cable Length | Meter | 1.8 m ( gas hose 4.8m ) |
| Weight | Kg | 10 |
| Wire Feed Speed | Meter / Minute | 5-20.1 |
| Duty Cycle | % | 60 |
| Wire feeder available | in standard lenghts of 1.8 mtrs , 5 | |
| WELDING TORCH | ||
| Rated welding current | Amps | 350 |
| 350 Amps , 60 % ( COâ‚‚ ) | ||
| Duty Cycle | 10 Min . Cycle | 350 Amps , 35 % ( CO , + Ar ) |
| Continuous | 270 Amps , 100 % ( COâ‚‚ ) | |
| Continuous | 200 Amps , 100 % ( COâ‚‚ + Ar ) | |
| Applicable Wire Diameter | mm | 0.8 , 1.0 , 1.2 |
| Cable Length | Meter | 3 |
| Weight ( Incl . Cable ) | Kg | 2.8 |
| ORDERING INFORMATION | ||
| Power Source | - | YD - 250RX1DJE |
| Wire Feeder | - | YW - 25KB3DTE |
| Welding Torch | - | YT - 35CS4DAF |
| Remote Management Controller | ||
| FOR STAINLESS STEEL MIG / MAG WELDING FOLLOWING CONFIGURATION | ||
| Power Source | YD - 250RX1DJS - Stainless steel welding model , 0.8 mm / 1.0 mm dia wire Solid SS wire & Solid MS wire | |
| Wire Feeder | YW - 25KB3DTE | |
| Welding Torch | YT - 35CS4DAF | |
Recently viewed
Featured collection
