Description
Key Features of Key YD – 500RX1
- Inverter-based digital wave control GMAW and FCAW welding
- Higher efficiency and higher power factor results in greater
power saving. - Designed to work even under high ambient temperatures up
to 50° - Lightweight and compact MIG/MAG/FCAW welding outfit.
- Unique design of three layer and four room dust-free
- RX1 Series is manufactured as per Std. IEC 60974-1:2000/GB
1:2004. - Fresh tip treatment and burn-back time control are
- Works on 50/60 Hz frequency in power supply.
- Equipped with Synergic Mode (Unitary Function) in which
welding voltage is set based on the welding current value
The voltage can be adjusted finely to fit the best current values. - Digitally controlled waveform enables superior arc
| Technical Specifications | Unit | YD - 500RX1 |
| INPUT | ||
| Input Supply | ||
| Voltage | Volts . | 415 , +10 % , -20 % |
| Phase / Freq . | No./Hz | 3ph / 50-60 |
| Max . Input KVA @ 415Vac | ||
| @ 60 % Duty Cycle | KVA / KW | |
| @ 100 % Duty Cycle | KVA / KW | 23.1 / 22.2 |
| OUTPUT | ||
| Rated Current Range | Amps | 60-550 |
| Rated Output Range | Volts | 17-41.5 |
| Welding Current ( 40 ° C ) | ||
| @ 60 % Duty Cycle | Amps | |
| @ 100 % Duty Cycle | Amps | 500 |
| GENERAL | ||
| Power Control Method | IGBT Inverter Controlled | |
| Digital Display | 4 Digit - 7 Segment LED Display | |
| Wave from Control | Digitally Controlled Waveform | |
| Welding Sequence | a . Main Welding b . Main welding - crater ( Crater repeat is available ) | |
| Ingress Protection | Class | IP 23 |
| Insulation | Type | H |
| Cooling | Forced air Cooling . | |
| Power Factor | Degree C | > 0.9 |
| Operating Temperature | -10 to 50 | |
| Dimensions ( LxBxH ) | mm | 545x380x635 |
| Weight | Kg | 60 |
| WIRE FEEDER | ||
| Rated Welding Current | Amps | 500 |
| Applicable wire diameter | mm | 1.2 , 1.6 |
| Cable Length | Meter | 1.8 m ( gas hose 4.8m ) |
| Weight | Kg | 10.5 |
| Wire Feed Speed | Meter / Minute | 5.3-20.1 |
| Duty Cycle | % | 60 |
| Wire feeder available | ||
| WELDING TORCH | ||
| Rated welding current | Amps | 450 |
| 450 Amps , 60 % ( COâ‚‚ ) | ||
| Duty Cycle | 10 Min . Cycle | 450 Amps , 35 % ( COâ‚‚ + Ar ) |
| Continuous | 350 Amps , 100 % ( CO ) | |
| Continuous | 270 Amps , 100 % ( COâ‚‚ + Ar ) | |
| Applicable Wire Diameter | mm | 1.2 , 1.6 |
| Cable Length | Meter | 3 |
| Weight ( Incl . Cable ) | Kg | 3.6 |
| ORDERING INFORMATION | ||
| Power Source | - | YD - 500RX1DJF |
| Wire Feeder | - | YW - 50KB3DRO |
| Welding Torch | - | YT - 50CS4HDAF |
| Remote Management Controller | ||
| FOR STAINLESS STEEL MIG / MAG WELDING FOLLOWING CONFIGURATION | ||
| Power Source | YD - 500RX1DJS - Stainless steel welding model , 1.2 mm dia wire solid SS , 1.2 mm / 1.6 mm solid MS wire & FCAW | |
| Wire Feeder | YW - 50KB3DRO | |
| Welding Torch | YT - 50CS4HDAF | |
Recently viewed
Featured collection
